With the widespread use of triangular tea bag packaging machines, some problems and accidents cannot be avoided. So how do we deal with this error? The following common faults and solutions are listed based on some of the problems that customers often encounter.

First, the noise is very loud.

Because the vacuum pump coupling is worn or broken during the operation of the tea packaging machine, a lot of noise will be generated. We just need to replace it. The exhaust filter is clogged or installed incorrectly, which will cause the equipment to make noise. We just need to clean or replace the exhaust. The filter is installed correctly.

Second, vacuum pump injection.

Since the O-ring of the suction valve is closed and the vacuum pump is ejected, we only need to unplug the vacuum tube at the pump nozzle to remove the suction nozzle, remove the pressure spring and suction valve, gently pull the O-ring several times, and then reinstall it. Insert into the groove of the packaging machine. It can be installed again, and rotating the rotor blades will also cause fuel injection. We just need to replace the rotating paddle.

Third, the problem of low vacuum.

This may be due to too little or too thin contamination of the pump oil, and we must clean the vacuum pump to replace it with new vacuum pump oil; the pumping time is too short, which can reduce the vacuum degree, and we can extend the pumping time; if the suction filter is clogged, please clean or replace it Exhaust filter for triangular bag packaging machine.